Nortel Norstar T7316E, Quick Programming Manual

Page: 11 / 42

11
S E C T I O N I I
Time and Date
CHANGING THE TIME AND DATE SETTINGS
Use this feature to change the clocks to GMT (winter) and BFT (summer) times. Clocks in spring is
**forward and in fall is **back. In this example, the time is changed to 1:30 p.m. and the date is changed
from January 1, 2001, to July 15, 2001.
To adjust the time and date on the entire system, you need only adjust the clock at one
extension using the Basic password. The clock, which also controls the schedules for
your routing and ringing features, must be re-set after a power failure.
ACTION VISUAL DISPLAY
1. Place the programming overlay over the appropriate buttons on
your programming telephone (refer to
"PROGRAMMING
OVERLAYS" on page 5).
1 Jan 1:00 am
2. Press
≤
followed by
••°›fl‹
(the Time and Date
code) followed by
¤¤‡›¤
(the Basic password).
Hour: 01
NEXT
CHANGE
3. Press
CHANGE
. Hour:__
CANCL
4. Use the keypad to enter the two-digit hour. The display shows
one or two digits. The display prompts you to choose
AM or PM .
AM
OK
CHANGE
5. Press
CHANGE
. AM
OK
CHANGE
6. Press
OK
.
Hour:01
NEXT
CHANGE
7. Press
NEXT
. Minutes:01
NEXT
CHANGE
8. Press
CHANGE
.
Minutes: __
CANCL
9. Using the keypad, enter the minutes. Minutes:30
NEXT
CHANGE
Press
®
to end the session if you do not want to go on to change
the date. To change the date, continue with Step 10.
10. Press
NEXT
. Year:01
NEXT
CHANGE
11. Press
CHANGE
.
Year:___
CANCL
12. Use the keypad to enter the year. Year:01
NEXT
CHANGE