44
Using the Nortel Application Switch Element Manager
Modifying the list of well-known ports
The
ports.properties
file contains a list of ports known to be used
by various protocols. This is used in the ASEM application where a list of
such ports is useful. This list can be edited in a simple text editor to add or
delete ports. For a list of well-known ports, refer Nortel Application Switch
Operating System 24.0 Command Reference (NN47220-105).
To modify the
ports.properties
file, perform the following procedure:
Step
Action
1
Open the
ports.properties
file in a text editor. This file is
located in
<ASEM installation directory>/properties
.
2
All entries in the file are listed in the following format:
Protocol=Port
Edit the file as appropriate using the format listed above.
Note: Editing the
ports.properties
file can have an adverse
affect on the application. Ensure all changes to this file are
intended before saving them.
3
Save the changes made to the file. These changes are displayed
the next time the application is started.
—End—
Modifying or adding Well-known Protocols
The
protocols.properties
file lists well-known protocols. This is used
in the ASEM application where a list of such protocols is useful. This list can
be edited in a simple text editor to add or delete protocols.
To modify the
protocols.properties
file, perform the following
procedure:
Step
Action
1
Open the
protocols.properties
file in a text editor. This file is
located in
<ASEM installation directory>/properties
.
2
All entries in the file are listed in the following format:
Protocol=Index Value
Edit the file as appropriate using the format listed above.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D)
01.01
Standard
5.0
28 January 2008
Copyright © 2008, Nortel Networks
.
