Nortel NN42020-310, Installation And Commissioning Manual, Page: 33 / 176

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide
Copyright © Nortel Networks Limited 2006
Installing and accessing the MRV
LX-4000 series terminal server
The MRV LX terminal server allows the installer to access all the
servers simultaneously.
Procedure 4 Connecting the MRV LX terminal server cable to the
servers and management PC
At the terminal server,
1 Connect port 8 to the management PC using the console cable
and db9 connector that comes with the MRV LX terminal server.
Note: After the terminal server has been configured, the
connection between the management PC and the terminal
server is not needed, and the cable can be removed.
2 Connect the MRV terminal server 10 Base-T port to the layer-2
switch.
Refer to the Getting Started with the LX-4000 Series document
in the CD that comes with your terminal server for specific
information about the pinouts on your terminal server model.
Procedure 5 Accessing the MRV LX terminal server
At the browser address field,
1 Type in the IP address of your MRV LX terminal server. The LX
Series Configuration Console page appears, as shown.
ATTENTION
For complete information on how to install, configure, and access
the MRV LX terminal server, refer to the MRV Communications,
Inc., LX Series Software Kit CD, particularly the "Getting Started
with the LX-4000 Series" and LX-4000 Quick Start Instructions
that come in the terminal server box, or go to
www.mrv.com .