manualshive.com logo in svg

Nortel NN42020-310, Installation And Commissioning Manual, Page: 127 / 176

Share
Download
Nortel NN42020-310 Installation And Commissioning Manual Download Page 127

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide

Copyright © Nortel Networks Limited 2006

Installing the UFTP BaseSoftware

You will be installing the UFTP software on the application server.

Prerequisites

The System Management Console has been successfully installed and 
started.

Note:

This procedure also assumes that the IP Client Manager 

(IPCM) component was deployed successfully; the UFTP software 
therefore can interact with the IPCM for firmware. 

Add the UFTP to the System Management Console

Procedure 34 Adding the UFTP software

At the System Management Console,

1

Select 

Sites->MgmtSite->AppSvr

.

2

Click on the plus sign next to the component to which you are 
adding the base software.

3

Right click on the 

Components

 folder.

4

Select 

Add->BaseSoftware

.

5

A list of loads appears in the pop-up window. Select the latest 
“UFTP” load.

6

Click 

Apply

.

Note:

The UFTP BaseSoftware has no configuration items. 

Once the installer clicks 

Apply

, the deployment of the UFTP 

BaseSoftware occurs immediately. Once the deployment is 
complete, UFTP will appear in the System Management 
Console file tree.

Summary of Contents for NN42020-310

















































































































































































Reviews:

No comments