manualshive.com logo in svg

Nortel NN42020-310, Installation And Commissioning Manual, Page: 13 / 176

Share
Download
Nortel NN42020-310 Installation And Commissioning Manual Download Page 13

MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide

13

Copyright © Nortel Networks Limited 2006

Figure 4 Example of 2-server Sun Fire V210 Solaris system configuration

Restrictions and limitations

The 2-server V210 Solaris system is non-redundant. Since redundancy 
is not built into the system, a server failure will result in the loss of 
services. The 2-server V210 Solaris system has a mirrored disk. In the 
event of a disk failure, the failed disk should be replaced as soon as 
possible. The 2-server V210 Solaris system has the following 
limitations: 

•

The system supports a maximum of 250 subscribers.

•

Supported conference ports consist of 30 G.711 or 10 G.729.

•

Only Ethernet interfaces 0 and 1 are supported.

•

The system does not support live upgrades.

•

System maintenance, starting, or stopping of components is not 
supported while the system is live. Doing any maintenance while the 
system is live may have adverse effects on call processing.

•

Two-server-to-four-server migration is not supported.

Summary of Contents for NN42020-310

















































































































































































Reviews:

No comments