manualshive.com logo in svg

Nortel Meridian IVR VT100, Development Manual

Share
Download
Nortel Meridian IVR VT100 Development Manual Download Page 84

A-10  Host error messages

555-9001-316  Standard 1.0  February 1996

Action to take:  

Contact your Nortel service representative. 

ERR: Create_queue_object: Attempt to create Queue class instance failed 

Meaning:   

TRS was unable to allocate memory for the 
QUEUE_CLASS structure. 

Action to take:  

Contact your Nortel service representative. 

ERR: A request for this channel is already being processed 

Meaning:  

The last COMO cell did not retrieve all the output buffers 
from TRS. 

Action to take:   

Place a COMA cell in the clean up handler section of the 

application to ensure that all output buffers will be flushed 
when the caller hangs up in the middle of a transaction. 
Furthermore, there should always be a COMO cell(s) after 
COMI cell(s) even though no output from the host is 
expected. The COMO cell(s) will retrieve a status indicating 
whether the transaction has been successful or not. 

ERR: Create_transaction_instance: Unable to create Transaction Object Instance 

Meaning:  

TRS was unable to allocate memory for the transaction 
structure 

Action to take:  

Contact your Nortel service representative. 

ERR: Create_timer_instance: Unable to create Timer Object Instance 

Meaning:   

TRS was unable to allocate memory for the timer structure. 

Action to take:  

Contact your Nortel service representative. 

ERR: Create_client_instance: Unable to create Client Object Instance - Exiting 

Meaning:   

TRS was unable to allocate memory for the client object 
structure. 

Action to take:   

Contact your Nortel service representative. 

ERR: Create_request_instance: Create_request malloc failed for queuing 

Meaning:   

TRS was unable to allocate memory for the request 
structure. 

Summary of Contents for Meridian IVR VT100


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands