manualshive.com logo in svg

Nortel Meridian IVR VT100, Development Manual

Share
Download
Nortel Meridian IVR VT100 Development Manual Download Page 36

Template files  2-23

Meridian IVR   VT100 Gateway Development Guide   Product release 2.0/I

When entering a field-descriptor, the entries on the line should be separated 
by white space or tab characters.  If you are entering text for the field I/O, the 
TRS ignores any white space you include with the value until it encounters 
the new line character (e.g., the value includes several words).  

Note:  The order of the field-descriptor lines in your screen template file 
determines how data is entered and retrieved from the screens and written into 
the input and output buffers of a COMO cell.  Chapter 4 describes how to use 
Meridian IVR 2.0/I cells to retrieve data from the host computer.

key-descriptor

Identifies a key to be used with the screen.  To send information to the 
computer for processing or to execute a command, the terminal operator 
presses a key on the terminal keyboard.  If you do not specify a key, nothing 
is sent to the host and the current screen does not change.  The key could be 
the ENTER key or a function key.  The format of this line is similar to the 
field-descriptor.  Figure 2-14 contains the format of the key-descriptor.

Figure 2-14
Key-descriptor line syntax

position-indicator  

This entry should be set to 0,0.

>  

This character indicates that this line contains a key.  

position-indicator         >          keyname

Summary of Contents for Meridian IVR VT100


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands