Nortel Meridian Companion, Installation And Maintenance Manual, Page: 43 / 218

Installing the hardware Page 33 of 206
Meridian Companion Installation and Maintenance Guide
Figure 15 : Plug-top power supply connector
9. Plug the power supply into the AC outlet. The green light turns on and
the red light flashes (if not, see “Troubleshooting a Base Station” on
page 169).
10. Record the associated port number in the space provided on the printed
label affixed on the lower right corner of the mounting bracket.
Note: Include the labeling information for each Base Station on the
completed installation floor plans and the Meridian Companion
Programming and Provisioning Record for reference.
11. Slide the cover onto the bracket, using the guide to position it properly.
Snap the cover into place.
Figure 16 shows a configuration for small installations in which the Base
Station is located near an existing AC power source or the Base Station is
farther from an RPI unit than 800 m.
plug-top power supply connector