Page 154 of 206 Maintenance
553-3601-220 Standard 4.00 November 1998
16.
Using the instructions described in “Card Status” on page 128, verify
that all cards are present and appear in the
Idle
state.
17.
Using the instructions described in “TCM Status” on page 132, verify
that all Base Stations are located in the appropriate slots and that the
Administration Terminal is in the first CMCC port.
18.
Set the proper system date and time as described in “Programming the
system time and date” on page 90.
19.
Verify proper operation by placing a call to at least one portable
telephone on each card.
Replacing a defective expansion card
“Troubleshooting cards” on page 165 lists the signs that indicate the need for
a card replacement. Card replacement should be performed when the card is
idle.
If the defective expansion card is on the far right of the Meridian Companion
set of cards, it can simply be removed and replaced with a new card. If the card
is in the middle of the card set, replace it by following these steps:
1.
Disable the card from the Meridian 1 system and the Meridian
Companion system.
2.
Open the door of the IPE or CE/PE Module or expansion cabinet.
STATIC!
Wear a grounding strap.
Do not touch the printed circuit board or the
connector. The printed circuit board is a static-
sensitive device.
WARNING!
Each maintenance cable has a left plug and
a right plug. Switching the plugs will disable
the Meridian Companion system.
Summary of Contents for Meridian Companion
