Nortel Meridian 1 Series Description Download Page 43

Page: 43 / 66

Attendant console operation

Page 43 of 64

Attendant Consoles

Description

M2250 failure codes

A failure code appears on the display in response to the detection of a
hardware fault.

Refer to Table 4 for an explanation of failure codes and possible solutions.

Table 4
M2250 failure codes (Part 1 of 2)

Failure
code

Printed
circuit
pack (PCP)

Reason

What to do

40H

UIP

The PSG, U13, is not
responding.

Unplug the line cord and plug it in
again. If the failure code still appears,
there is an electrical fault in the
console, and it should be returned.

Note:

Log the failure code with the

returned unit, as it gives an indication of
which component has failed.

20H

UIP

The RTC, U16, is faulty.

Same as for

40H

10H

UIP

The RAM IC, U1, is faulty.

Same as for

40H

08H

UIP

A key in column A is stuck.

Unplug the line cord.
Free the key if it is stuck.
Plug in the line cord.
If the failure code still appears, the
console is faulty and should be
returned.

09H

UIP

A key in column B is stuck.

Same as for

08H

0AH

UIP

A key in column C is stuck.

Same as for

08H

0BH

UIP

A key in column D0 is
stuck.

Same as for

08H

Summary of Contents for Meridian 1 Series



































































Search results

Summary of Contents for Meridian 1 Series

Reviews:

Related manuals for Meridian 1 Series

Brands by name

Popular brands

Nortel Meridian 1 Series, Description

Search results

Summary of Contents for Meridian 1 Series

Reviews:

Related manuals for Meridian 1 Series

Brands by name

Popular brands