Attendant console operation
Page 35 of 64
M1250/2250 console diagnostics
Use the Diagnostics menu to check the functions of the console and to
perform tests. To enter the Diagnostics mode, use the following procedure.
Figure 5 shows the main Diagnostics menu for the M1250 and M2250
attendant consoles.
1
Press the Shift key.
2
Press the
key (function key F4).
3
On M2250 consoles, enter password “9999.”
4
Press the asterisk (*) key to enter Diagnostics menu 1. To toggle between
menu 1 and menu 2, press the asterisk (*) key.
5
To quit the Diagnostics mode, press the pound (#) key.
Follow the procedures listed below to perform the Diagnostic tests.
Figure 5
Console Diagnostics menus
DIAGNOSTICS MENU:
1. KEYBOARD
4. ICs
2. LAMPS
5. LAMP FIELD
<next>
3. DATA PORT
6. ALERTER
# <exit>
{ 1 }
*
DIAGNOSTICS MENU:
1. DISPLAY
4. CONTROL
2. FIRMWARE
5. RESET
<next>
3. QMT2
# <exit>
{ 2 }
*
Summary of Contents for Meridian 1 Series
