Nortel M2018, Reference Manual

Page: 61 / 101

16 Testing and maintenance
555-4001-110 Standard 09.03 July, 2002
Response: The system provides stuttered dial tone.
4 Dial the ASR In code (datafilled in table IBNXLA).
Response: The ASR In code is datafilled in table IBNXLA. The
system provides special dial tone.
5 Dial the 6-digit ID code (as specified in Procedure 8).
Response: The system provides confirmation tone for
successful code entry. The system provides dial tone for first
invalid code and treatment for the second invalid personal ID
code.
6 Wait one minute before attempting to use the telephone set or
the corresponding data device
Response: The system moves the datafill for the telephone
during this time from the virtual LEN to the new LEN.
Task is complete.
ASR audit
If a user performs the ASR Out process, takes the telephone set to an
empty LEN, and plugs the set in, the ASR process creates the
temporary datafill. If the user does not perform the ASR In process, the
temporary datafill is deleted by an ASR audit that runs once a day. This
audit searches table IVDINV for ASR created entries. When it finds one,
it deletes the directory number and line information from the
corresponding entry in table KSETLINE and then removes the ASR
entry in table IVDINV.
To allow flexibility in executing this audit each day, the office parameter
ASR_AUDIT_TIME in table OFCVAR is provided. It is recommended
that this audit be executed during non–peak hours. It is also
recommended that the ASR audit not be executed during the time of the
CC REXX or XPM REXX tests. These tests may affect the audit. The
default time for the audit is 1:00 a.m.