Nortel M2018 Reference Manual Download Page 101 | Manualshive

Page: 101 / 101

background image

Meridian SL-100

Meridian SL-100

M2000 Digital Telephone Reference Manual

Copyright © 1987-2002 Nortel Networks,
All Rights Reserved

NORTEL NETWORKS CONFIDENTIAL:

The information contained in this document is the

property of Nortel Networks. Except as specifically authorized in writing by Nortel Networks, the holder of this
document shall keep the information contained herein confidential and shall protect same in whole or in part
from disclosure and dissemination to third parties and use same for evaluation, operation, and maintenance
purposes only. Changes or modifications to the Meridian SL-100 without the express consent of Nortel
Networks may void its warranty and void the user’s authority to operate the equipment.

Information is subject to change without notice. Nortel Networks reserves the right to make changes in design
or components as progress in engineering and manufacturing may warrant.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules, and the radio interference regulations of the Canadian Department of
Communications. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at the user’s
own expense. Allowing this equipment to be operated in such a manner as to not provide for proper answer
supervision is a violation of Part 68 of the FCC Rules, Docket No. 89-114, 55FR46066.

*Nortel Networks, the Nortel Networks logo, the Globemark, Unified Networks, DMS, MAP, Meridian, MSL,
Nortel, Northern Telecom, NT, SL-100, and SuperNode are trademarks of Nortel Networks.

Publication number: 555-4001-110
Product release: MSL07
Document release: Standard 09.03
Date: July, 2002
United States of America

«
...
99
100
101

Summary of Contents for M2018






































































































Reviews:

No comments

Related manuals for M2018

Brand: NEC Pages: 30

Brand: Grandstream Networks Pages: 25

Brand: Polycom Pages: 2

One X9 dual sim

Brand: HTC Pages: 2

Brand: HART Pages: 22

Brand: DDM Brands Pages: 74

Brand: SoftBank Pages: 19

WirelessIP 3000

Brand: Hitachi Cable Pages: 132

Brand: Zte Pages: 174

Brand: LG Pages: 124

Brand: LG Pages: 124

Brand: LG Pages: 121

Brand: LG Pages: 134

Brand: LG Pages: 125

Brand: LG Pages: 175

Brand: LG Pages: 123

Brand: LG Pages: 91

Brand: LG Pages: 121

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands