6-14 Installation and commissioning procedures
Internet BWA System 3200 NTXXXXXX Rel 3.0 Draft October 2000
Procedure 6-3 (continued)
Connecting the interface cables
•
Additional guidelines before the connection of the interface cable:
— When cutting the cable length, be sure to add extra length for the
service loop.
— Ensure that a strain relief is added to each cable connection.
— Ensure that the external connector is sealed and waterproof.
— Follow standard installation practices.
–
Avoid sharp corners.
–
Attach the interface cable to the tower members or cable runways
with the use of hanger kits or tie-wraps at one meter intervals.
— When routing the interface cable, avoid blocking the wireless antenna
pattern.
Tools
•
11mm / 7/16” open wrench
•
13mm / 1/2” open wrench
•
phillips screwdriver (medium)
•
Cable cutter
•
Knife, skinning
•
Pliers, long nose
•
Cable ties (P0567238)
•
Screwdriver, slotted 1/8 inch
•
Anti-static kit
•
Wire cutter
•
Crimper (for coaxial cable)
•
Wire wrap tool (for twisted pair cable)
•
Soldering iron with solder
Equipment
•
one (1) 433.92 MHz antenna with reverse SMA connector
•
one (1) optional RG-58U test cable with a reverse SMA female connector
fitted at one end and a BNC male connector at the other end.
•
one (1) twisted pair interface cable
—continued—
Summary of Contents for Internet BWA System 3200
