Nortel i2002 Page 37 User Manual Download

Page: 37 / 84

While on an active call

Use Attendant Recall

Use the Attendant Recall

feature to contact an attendant during a call and to connect

the call to the attendant.

To contact the attendant while on a
call:

1. Press the

Attendant Recall

key and stay

on the line until the attendant answers.

2. Press the

Goodbye

key. The caller

remains connected to the attendant.

Use Call Park

Use the Call Park

feature to hold temporarily (parked) and retrieve a call from any

telephone. Using Call Park does not tie up a line and, when configured network-wide,
can be used across networks. A

System Park Extension

can be set to automatically

park most calls.

To park a call on the System Park DN
or your own DN:

During an active call, press the

Park

key

twice.

By default, the call is parked on your DN
unless a

System Park

is enabled to

automatically park calls on the system.

To park a call on a DN other than the
System Park DN or your own DN:

1. Press the

Park

key.

2. Dial the DN where you want to park the

call.

3. Press the

Park

key.

AttRcl

Park

Summary of Contents for i2002





















































































Search results

Summary of Contents for i2002

Reviews:

Related manuals for i2002

Brands by name

Popular brands

Nortel i2002, User Manual

Search results

Summary of Contents for i2002

Reviews:

Related manuals for i2002

Brands by name

Popular brands