manualshive.com logo in svg

Nortel Contivity1510D, Reference

Share
Download
Nortel Contivity1510D Reference Download Page 92

92 Chapter 2 CLI Command Summary

311645-A Rev 00

latest

The switch should be rebooted with the latest configuration file.

factory

The switch should be rebooted with the reset configuration file. 
This file sets the switch to basic defaults. The contents of the 
LDAP database and other settings are still maintained.

config-name

Name of previously saved configuration to use on reboot.

disable-logins

No more logins should be permitted before the reboot 
occurs.

disable-after-restart

Logins should not be permitted after the reboot. This is 
intended to support system maintenance tasks after a 
reboot.

text

If present, this explains the reason for a reload command. 
This reason will be displayed on the Admin->Shutdown 
and Status->System Web management pages.

If the value for the text parameter contains spaces, it may 
be enclosed in double quotes so that it has a single 
parameter value.

Default

The default settings for this command are determined by any previous reload 
command. For the first reload command, the following defaults apply:

restart

boot-drive ide0

config-file latest

Command mode

Privileged Exec

Summary of Contents for Contivity1510D































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands