38 Chapter 1 Introduction
311645-A Rev 00
Global Configuration Mode
This mode allows the administrator to make changes to the switch running
configuration. These changes are saved across reboots. This mode is also used to
access other configuration modes (Router, and so on, to be supported in
subsequent releases). The administrator enters this mode from Privileged Exec
mode using the configure command. To leave this mode and return to Privileged
Exec mode, the user enters Ctrl-Z.
Global Configuration Mode prompt
CES(config)#
Global Configuration Mode commands
The following table summarizes the Global Configuration Mode commands.
show logging events
Show event log contents
show logging history
Show the logging history setting
show logging security
Show security log contents
show logging syslog
Show system log contents
Table 4 Global Configuration Mode commands
Command
Description
arp
Delete ARP cache entries
audible alarm
Enable audible alarm
console mode
Set administration console mode
(Mini-CLI)
control
Maintain control tunnel connections
(Mini-CLI)
default logging history
Set logging history level to default
value
enable password
Assign privileged level password
end
Exit from configure mode
Table 3 Privileged Exec Mode commands
Command
Description
