Chapter 1 Introduction 39
Reference for the Contivity VPN Switch Command Line Interface
Key bindings
You can use the Nortel Networks CLI (NNCLI) commands to edit command line
text entries. Table 2 describes key bindings for NNCLI.
exit
Exit from configure mode
help
Display message about using help
ip http server
Enable/disable HTTP management
ldap
Control LDAP server (Mini-CLI)
load
Bulk load configuration commands
(Mini-CLI)
logging history
Control system logging level
logout
Exit the Telnet session (Mini-CLI)
reset
Set switch system boot mode
(Mini-CLI)
restore flash
Restore factory default switch flash
settings
restore system
Restore factory default switch
configuration
restrict
Restrict management access to
(Mini-CLI)
save current_boot
Save current boot config (Mini-CLI)
shutdown
Shutdown the switch (Mini-CLI)
snmp-server contact
Set the contact details for the switch
snmp-server location
Set the locations details for the switch
snmp-server name
Set the administrative name for the
switch
Table 5 NNCLI key bindings
Keys
Function
control-A
start of line
control-B
back 1 character
control-C abort
command
Table 4 Global Configuration Mode commands
Command
Description
