Nortel Compact ICS 7.1, Coordinator Manual

Page: 129 / 266

Communicating in the office / 129
N0130955 01 Compact ICS 7.1 System Coordinator Guide
Canceling a message you have sent
1. Press
≤£⁄
. The display shows
Cancel for:
.
2. Enter the internal number of the person to whom you sent the message.
Viewing your messages
≤flfi
You can receive up to four messages from different telephones, including
your voice message center. A single message from your voice message
center may pertain to several voice messages.
On a telephone with a one-line display
1. Press
≤flfi
. The display shows the first message.
2. Press
•
or
£
to move through your messages.
TIP -
Only the designated direct-dial telephone for an
analog telephone connected to an Analog Station
Module (ASM) can send messages to analog telephones
by pressing
≤⁄
. Depending on the programming
setup, the analog telephone provides either a Stuttered
Dial Tone or a Message Waiting Lamp to inform the user
of messages pending.
For analog telephones connected to an ASM, the
message waiting indicator remains on until the user
invokes
˚ £flfi
. If the analog telephone has
the Message Reply Enhancement feature set to Yes, the
message waiting indicator is turned off automatically
after the reply call is answered no matter from where the
call is answered.
For more information about the Message Reply
Enhancement feature, see the
Norstar Compact ICS 7.1
Installer Guide .