Nortel business policy switch 2000, User Manual

Page: 199 / 412

Chapter 3 Using the console interface 199
Using the Business Policy Switch 2000 Version 2.0
Figure 68 VLAN Configuration screen
Table 23 describes the VLAN Configuration screen fields.
Table 23 VLAN Configuration screen fields
Field Description
Create VLAN Allows you to set up or view configured VLAN workgroups. Enter the number of the
new VLAN you want to create or view, then press [Return]. The Port Membership
fields indicate the corresponding VLAN workgroup configuration, if configured.
Dashes (-) indicate no VLAN Members are configured. Alternatively, you can use
the space bar to toggle through the various configured VLAN workgroups. You can
create up to 255 different VLANs (except VLAN #1).
Default 1
Range 2 to 4094
Delete VLAN Allows you to delete specified VLANs, except the assigned management VLAN
(See Management VLAN field). Enter the number of the VLAN you want to delete,
then press [Return], or use the space bar to toggle through the selection until you
reach the VLAN you want to delete, then press [Return].
VLAN Configuration
Create VLAN: [ 1 ] VLAN Type: [ Port-Based ]
Delete VLAN: [ ] Protocol Id (PID): [ None ]
VLAN Name: [ VLAN #1 ] User-Defined PID: [ 0x0000 ]
Management VLAN: [ Yes ] Now: 1 VLAN State: [ Active ]
IVL/SVL: [ IVL ]
Port Membership
1-6 7-12 13-18 19-24
------ ------ ------ ------
Unit #1 TUUUUU UUUUUU UUUUUU UUUUUU
Unit #2 UUUUUU UUUUUU UUUUUU UUUUUU
KEY: T= Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to
Main Menu.