manualshive.com logo in svg

Nortel business policy switch 2000, User Manual

The Nortel Business Policy Switch 2000 is an advanced networking solution. Gain a thorough understanding of its capabilities with our comprehensive User Manual. Download it for free from manualshive.com to unlock the full potential of this powerful business tool.

Share
Download
background image

Chapter 3 Using the console interface

189

Using the Business Policy Switch 2000 Version 2.0

 

MAC Address Security Table screens

The MAC Address Security Table screens allow you specify the ports that each 
MAC address is allowed to access. You must also include the MAC addresses of 
any routers that are connected to any secure ports.

There are 16 available MAC Address Security Table screens (

Figure 64

) that you 

can use to create up to 448 MAC address entries (28 per screen). 

Figure 64   

MAC Address Security Table screens

➨

Choose MAC Address Security Table from the MAC Address Security 
Configuration Menu to open the MAC Address Security Table screen 
(

Figure 65

).

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 1   More...

Press Ctrl-N to display next screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

                          MAC Address Security Table
                     Find an Address: [ 00-00-00-00-00-00 ]
       MAC Address    Allowed Source        MAC Address   Allowed Source
       -----------    --------------        -----------   --------------
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
 [   -  -  -  -  -   ]  [   ]          [   -  -  -  -  -   ]  [   ]
                                                          Screen 16

Press Ctrl-P to display previous screen.
Enter MAC Address, xx-xx-xx-xx-xx-xx, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

Screen 1

Screen 16

Summary of Contents for business policy switch 2000





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for business policy switch 2000

Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Brand: Billion Pages: 146
H3C SR6600 Series Faq preview
SR6600 Series
Brand: H3C Pages: 22
H3C S5800-60C-PWR Ordering Manual preview
S5800-60C-PWR
Brand: H3C Pages: 3
Caimore CM520-86EG User Manual preview
CM520-86EG
Brand: Caimore Pages: 79
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Brand: RuggedCom Pages: 23
ADC PG-FlexPlus AMU-912 Manual preview
PG-FlexPlus AMU-912
Brand: ADC Pages: 130
IBM totalstorage 200 Service Manual preview
totalstorage 200
Brand: IBM Pages: 180
Lancom GS-2310P Instruction Manual preview
GS-2310P
Brand: Lancom Pages: 25
APARIAN DH485 Quick Start Manuals preview
DH485
Brand: APARIAN Pages: 2
National Instruments Fieldpoint cFP-RTD-124 Operating Instructions Manual preview
Fieldpoint cFP-RTD-124
Brand: National Instruments Pages: 15
Tripp Lite N201-005-BL Specification Sheet preview
N201-005-BL
Brand: Tripp Lite Pages: 3
TP-Link ER8411 Installation Manual preview
ER8411
Brand: TP-Link Pages: 2
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Brand: G&D Pages: 228
Aaeon FWS-7150 Manual preview
FWS-7150
Brand: Aaeon Pages: 57
Juniper NSM4000 Hardware Manual preview
NSM4000
Brand: Juniper Pages: 196
PairGain T1L2PY0AA Manual preview
T1L2PY0AA
Brand: PairGain Pages: 80
Hawking H-CF30W Quick Installation Manual preview
H-CF30W
Brand: Hawking Pages: 21
ORiNG TGXPS-1080-M12-MV Series Quick Installation Manual preview
TGXPS-1080-M12-MV Series
Brand: ORiNG Pages: 2

Brands by name

Popular brands

Load more brands