Nortel business policy switch 2000, User Manual

Page: 160 / 412

160 Chapter 3 Using the console interface
208700-C
Software Download... Displays the Software Download screen (see “Software Download screen ” on
page 265 ). This screen allows you to revise the Business Policy Switch software
image that is located in nonvolatile flash memory (NVRAM).
Configuration File... Displays the Configuration File Menu screen (see “Configuration File Menu
screen ” on page 274 ). This menu provides the following options: Configuration
File Download/Upload and ASCII Configuration File Download.
Display System Log Displays the System Log screen (see “System Log screen” on page 282 ).
Reset Resets the switch with the current configuration settings. This option is followed
by a screen prompt that precedes the action. Enter Yes to reset the switch; enter
No to abort the option:
• If the switch is participating in a stack configuration, additional prompts allow
you to choose to reset a specific unit in the stack or the entire stack.
• When you select this option, the switch resets, runs a self-test, then displays
the Nortel Networks logo screen. Press [Ctrl]-Y to access the Business
Policy Switch main menu.
Reset to Default
Settings Resets the switch to the factory default configuration settings. This option is
followed by a screen prompt that precedes the action. Enter Yes to reset the
switch to the factory default configuration settings; enter No to abort the option:
• If the switch is participating in a stack configuration, additional prompts allow
you to choose to reset a specific unit in the stack or the entire stack.
• When you select this option, the switch resets, runs a self-test, then displays
the Nortel Networks logo screen. Press [Ctrl]-Y to access the Business
Policy Switch main menu.
NOTE : The following items do NOT reset: Stack Operational Mode, Reset Count,
and Reason for Last Reset.
Caution: If you choose the Reset to Default Settings option, all of your
configured settings will be replaced with factory default settings when
you press [Enter]
Achtung: Bei Auswahl des Befehls zur Rücksetzung auf die
Standardeinstellungen werden alle von Ihnen konfigurierten
Einstellungen durch die werkseitigen Standardeinstellungen ersetzt,
wenn Sie die Eingabetaste drücken.
Attention: Si vous restaurez la configuration usine, votre configuration
courante sera remplacée par la configuration usine dès que vous
appuierez sur [Entrée].
Precaución: Si selecciona el comando Restaurar valores
predeterminados, todos los valores de configuración se sustituirán por
las valores predeterminados en fábrica al pulsar [Intro].
Table 10 Console interface Main Menu options (continued)
Option Description