Nortel BSR222, Configuration, Page: 362 / 451

362 Chapter 19 UPnP
NN47922-500
Displaying UPnP port mapping
Click UPnP and then Ports to display the screen as shown in Figure 136 . Use this
screen to view the NAT port mapping rules that UPnP creates on the Business
Secure Router.
Figure 136 UPnP Ports
Table 100 describes the labels in Figure 136 .
Table 100 UPnP Ports
Label Description
Retain UPnP
port forwarding Select this check box to have the Business Secure Router retain UPnP
created NAT rules even after restarting. If you use UPnP and you set a
port on your computer to be fixed for a specific service (for example,
FTP for file transfers), the Business Secure Router can keep a record
when your computer uses UPnP to create a NAT forwarding rule for that
service.
The following read-only table displays information about the UPnP-created NAT mapping
rule entries in the Business Secure Router’s NAT routing table.
# This is the index number of the UPnP-created NAT mapping rule entry.
Remote Host This field displays the source IP address (on the WAN) of inbound IP
packets. Because this is often a wildcard, the field can be blank. When
the field is blank, the Business Secure Router forwards all traffic sent to
the
External Port on the WAN interface to the Internal Client on the
Internal Port . When this field displays an external IP address, the NAT
rule has the Business Secure Router forward inbound packets to the
Internal Client from that IP address only.