Nortel BSG12aw, Installation Manual

Page: 60 / 66

60 WiFi module replacement
NN47928-302 NN47928-302
Variable definitions
Use the data in the following table to use the fields in the logon page.
Saving the running configuration to Flash using the CLI
Use this procedure to save the running configuration using the CLI.
Procedure steps
Step Action
1 Launch an SSH session.
2 Log on to the BSG12ew/aw/tw using the user ID and password.
3 At the prompt, enter the following command:
write startup-config
End
Variable definitions
Use the data in the following table to use the fields in the logon page.
Replacing the WiFi module
Use this procedure to replace the WiFi module in the BSG12ew/aw/tw.
Prerequisites
• If the system is still operating, perform the procedure “Shutting down the BSG8ew/12ew/
aw/tw” on page 63 .
Variable Value
User Name Specify the user name. The
default logon name is
nnadmin.
Password Specify the password. The
default password is
PlsChgMe!.
Variable Value
User Name Specify the user name. The
default logon name is
nnadmin.
Password Specify the password. The
default password is
PlsChgMe!.