Chapter 5 ISDN overview
33
Telephony Device Installation Guide
•
Subaddressing of terminal equipment (TE) on the same BRI loop. However, terminal
equipment which supports sub-addressing is not commonly available in North America (for
BRI only).
Transmission of B-channel packet data using nailed up trunks is not supported by BCM50.
Contact your ISDN service provider for more information about these services and features. For
more information about ordering ISDN service in North America, see
and
“Ordering ISDN BRI” on page 39
.
The terminal equipment connected to the BCM50 system can use some feature codes supported by
the ISDN service provider.
Network name display
This feature allows ISDN to deliver the Name information of the users to those who are involved
in a call that is on a public or private network.
Your BCM50 system displays the name of an incoming call when it is available from the service
provider. If the Calling Party Name has the status of
private
, it appears as
Private name
, if that
is how the service provider has indicated that it mus appear. If the Calling Party Name is
unavailable it can appear as
Unknown name
.
Your system can display the name of the called party on an outgoing call, if it is provided by your
service provider. Your system sends the Business Name concatenated with the set name on an
outgoing call but only after the Business Name has been programmed.
The available features include:
•
Receiving Connected Name
•
Receiving Calling Name
•
Receiving Redirected Name
•
Sending Connected Name
•
Sending Calling Party Name
Consult your customer service representative to determine which of these features is compatible
with your service provider.
Name and number blocking
When activated, use
FEATURE 819
to block the outgoing name or number (or both) for each call.
Name and number blocking can be used with a BCM50 set.
Consult your customer service representative to determine whether or not this feature is
compatible with your provider.
Note:
Name and number blocking is only available in North America.
Summary of Contents for BCM50 2.0
