7
Annex Communications Server R7.1B and Annex Host Tools R14.2 Release Notes
302566-A Rev. 00
Other Limitations
The NA and Admin command set port speed 57600 produces an
erroneous return when the hardware does not support that speed.
Admin produces invalid structure for parameter :speed: 7. NA
produces Netadm error: erpc abort; invalid parameter value.
The parameter need_dsr is ignored for SLIP and PPP lines.
The Annex ignores parameters after rs232AsyncPortAutobaud that
are contained within the same SNMP Set request. The work-around
is to insure that the rs232AsyncPortAutobaud set request is at the end
of the set request packet or is alone in the set request.
Problems Resolved with this Release
SPR 11150 The acp_logfile is now year 2000 compliant.
The year 2000 is now displayed as "00" rather than "100".
If you are not installing on one of the supported host
platforms and you use the acp_logfile for accounting
purposes, you should be aware that after 991231 (which
represents 1999/12/31) midnight, the entry in the
acp_logfile will appear as 1000101 instead of 000101. If
you have scripts that use this information for accounting,
you need to modify those scripts to handle this properly.
SPR.9576
Aprint now works properly.
