Nortel Agent Greeting 2.0, Maintenance And Troubleshooting Manual

Page: 14 / 38

Page 14 of 36 Agent Greeting Card Test and Debug Capabilities
297-2183-502 Release 2.0.1 June 2001
Note: The security dongle is required for normal Agent Greeting Card
operation. A keycode is supplied during installation, which is matched to
the dongle and authorises a number of ports for use.
The Agent Greeting Card reports a missing dongle during boot up via a
message on the serial connection and the faceplate 4 segment display. Once
a dongle is inserted the serial number is reported during boot up.
Table 2: Hex Display codes during bootup
Display Code Definition
T:00 Initialization
T:01 Testing Internal RAM
T:02 Testing ALU
T:03 Testing address modes
T:04 Testing Boot ROM
T:05 Testing timers
T:06 Testing watchdog
T:07 Testing external RAM
T:08 Testing Host DPRAM
T:09 Testing DS30 DPRAM
T:10 Testing for presence of dongle (see note below)
T:11 Testing flash memory
T:12 Programming PCI FPGA
T:13 Programming DS30 FPGA
T:14 Programming CEMUX FPGA
T:15 Programming DSP FPGA
T:16 Testing CEMUX interface
T:17 Testing EEPROM
T:18 Booting 486, waiting for response with self test
information
T:19 Waiting for application start-up message from 486
T:20 CardLAN enabled, waiting for Request Config. Message
T:21 CardLAN operational, A07 enabled, display now under
host control