Nortel 8660 SDM Installing Download Page 17

Page: 17 / 72

Installing the 8660 Service Delivery Module (SDM)

How to get help

This section explains how to get help for Nortel products and services.

Finding the latest updates on the Nortel Web site

The content of this documentation was current at the time the product was
released. To check for updates to the latest documentation and software for the

Ethernet Routing Switch

, click one of the following links:

Getting help from the Nortel Web site

The best way to get technical support for Nortel products is from the Nortel
Technical Support Web site:

www.nortel.com/support

This site provides quick access to software, documentation, bulletins, and tools to
address issues with Nortel products. From this site, you can:

•

download software, documentation, and product bulletins

•

search the Technical Support Web site and the Nortel Knowledge Base for
answers to technical issues

•

open and manage technical support cases

Link to

Takes you directly to the

Latest software

Nortel page for

Ethernet Routing Switch

software.

Latest documentation

Nortel page for

Ethernet Routing Switch

documentation.

Summary of Contents for 8660 SDM









































































Search results

Summary of Contents for 8660 SDM

Reviews:

Related manuals for 8660 SDM

Brands by name

Popular brands

Nortel 8660 SDM, Installing

Search results

Summary of Contents for 8660 SDM

Reviews:

Related manuals for 8660 SDM

Brands by name

Popular brands