121
WLAN Cable Access Point 6220 CSU NTPM99CA Rel 2.0 Issue 5 Dec 2005
Network ID
-- Enter the Secure Data Mode network ID number (0-15)
used to differentiate between multiple Secure Data Mode stations using
the same System Access Pass Phrase. This is used to allow a Secure Data
Mode satellite to specify the Base Station it wants to connect to if two
base stations can be seen by the same satellite. Generally, this value
should be the same as the Channel Number.
802.11 Frequency Setup
-- Click the Frequency button on the 802.11
Setup screen displays the 802.11 Frequency Setup screens, which allows
you to set the Frequency Channel for your 802.11 radio card.
The 802.11 Frequency Setup screen is used to change the channel and
frequency for one of the remote devices on your network. Note that this
screen is only accessible if you have identified remote devices in your
network. If all devices are in your local network, then the Frequency
Setup screen is unavailable.
Channel/Frequency
-- Select the channel and frequency for the remote
device from the drop-down list. See Frequency Channels for a more
detailed explanation of the frequency channels.
[802.11a]
Frequency Channel
149 5745
MHz
153 5765
MHz
157 5785
MHz
161 5805
MHz
[802.11b/g]
Frequency Channel
6 2437
MHz
1 2412
MHz
7 2442
MHz
2 2417
MHz
8 2447
MHz
3 2422
MHz
9 2452
MHz
4 2427
MHz
10 2457
MHz
5 2432
MHz
11 2462
MHz
Radio Transmit Rate
-- Select the radio bit rate used to transmit.
Your choices are:
[802.11a]
Transmit Rate
6Mbps 36Mbps
9Mbps 48Mbps
12Mbps 54Mbps
24Mbps