manualshive.com logo in svg

Nortel 2230, Quick Install Manual

Share
Download
Nortel 2230 Quick Install Manual Download Page 6

May 2004

4

Step 2: Configuring the WLAN Access Port (2230/2231) Before Installation

Step 2: Configuring the WLAN Access Port (2230/2231) Before 
Installation

Step 2: Config uri ng th e WLAN A ccess Port (2230 /2231 ) Befo re Inst al lation

The following procedures are designed to make sure that your WLAN Access Port (2230/2231) physical installation goes 
smoothly and that initial operation is as expected. 

See “How to get help” on page 23

 if you are unable to prepare your WLAN 

Access Port (2230/2231) for deployment.

Note:

 Perform the following procedure on each Nortel Networks WLAN - Access Port (2230/2231) BEFORE 

deploying the WLAN Access Port (2230/2231) in its final location.

•

Preparing a Nortel Networks WLAN - Access Port (2230/2231)

 for installation in a Version 2.0 Nortel Networks 2200 

series environment

Preparing a Nortel Networks WLAN - Access Port (2230/2231)

Preparing a Version  2.0 Nortel Netwo rk s WLAN - Access Port (22 30/223 1)

If your Nortel Networks WLAN - Access Port (2230/2231) has Operating System 2.0 or a later version loaded on it, continue with 
this procedure.

Note:

 This procedure assumes that you are preparing a version 2.0 Nortel Networks WLAN - Access Port (2230/

2231) to interoperate with a version 2.0 WLAN Security Switch (2270). 

Configuration Setup

Conf iguration Setup

Does My AP Qualify for this Procedure?

Does My AP Qualify for this Procedure?

•

See “How to get help” on page 23

 if your 2.0 or later version later Nortel Networks WLAN - Access Port (2230/2231)(s) 

cannot be configured for any reason using the following procedure.

Configuration Steps for a Nortel Networks WLAN - Access Port (2230/2231)

Conf iguration  St eps f or an WLAN Access  Port  (2230/ 2231) or TBD-Marketing

1.

Configure the WLAN Security Switch (2270) in 

LWAPP Layer 3 Mode

 and make sure its DS Port is connected to the 

network. Use CLI, Web Browser and/or WLAN Management System procedures as described in the WLAN Security 
Switch (2270) Quick Installation Guide and the Nortel Networks Product Documentation. 

Note:

 When you are installing a WLAN Access Port (2230/2231), a DHCP server must be accessible by the WLAN 

Access Port (2230/2231).

11299EA

WLAN Switch

Layer 2/3 Device

Nortel APs

Summary of Contents for 2230



























Reviews:

No comments

Brands by name

Popular brands

Load more brands