manualshive.com logo in svg

Nortel 2230, Quick Install Manual

Share
Download
Nortel 2230 Quick Install Manual Download Page 17

May 2004

15

Step 4: Mounting the WLAN Access Ports (2230/2231)

Projection Wall Mount

Project ion Wall  Mount

When you are mounting the WLAN Access Port (2230/2231) out from a wall (flat sides along the wall or hallway), use an optional 
factory-orderable projection-mount L-bracket.

•

Before proceeding, gently screw the two factory-supplied screws and spring washers into the bottom of the WLAN 
Access Port (2230/2231). Make sure the spring washers have their convex (high center sections) pointing toward the 
screw heads.

Note: 

The WLAN Access Port (2230/2231) threaded holes have precision-depth threads. Do not overtighten the 

screws, or the bracket will not fit under the screw heads.

Figure - 

Assembling the Mounting Screws and Spring Washers to the WLAN Access Port (2230/2231)

•

Copy the MAC address(es) from the label(s) on the WLAN Access Port (2230/2231) onto the corresponding location on 
the map. MAC addresses have the format 000B85xxxxxx.

•

You have already attached the projection-mount L-bracket to the wall in 

Step 3: Preparing Mounting Locations

.

•

Slide the screws into the keyhole slots on the mounting bracket as shown in the following figure.

Summary of Contents for 2230



























Reviews:

No comments

Brands by name

Popular brands

Load more brands