Nortel 2201, Installing And Using

Page: 27 / 44

Chapter 2 Utility Configuration 27
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2201
The profile is now configured to use WPA with TLS as the EAP type.
The following example will configure the profile to connect to a network
using WEP with pre-shared keys.
a From the Security tab, select the WEP Pre-Shared Key radio button. Click
“Configure...” and the Define Pre-Shared Keys dialog box appears
(Figure 26) .
Figure 26 Define Pre-Shared Keys
b Select the key entry method, the key length and enter at least one
pre-shared key in the corresponding field. Click “OK” to save the
pre-shared key information.
c
Click “OK” to dismiss the Profile Management dialog box.
The profile is now configured to use WEP with pre-shared keys.
6
Click on the Advanced tab to set advanced settings (Figure 27) . Table 4 shows
the items on the Network Configuration Settings - Advanced tab.
Note: All keys must be entered using the same format (ASCII or
Hexadecimal).