Installing the ARN
114200-E Rev 00
1-15
Figure 1-10.
Connecting a Token Ring UTP Cable
Connecting to a Serial Interface
You connect 44-pin serial cables to the connectors on ARN adapter and expansion
modules. Each serial interface supports multiple WAN protocols at a transmission
rate of 1200 b/s to 2.048 Mb/s.
To connect to the serial interface:
1.
Locate the serial interface cable.
The serial interfaces automatically configure the desired electrical interface
when used with standard keyed cables. For information about cables available
from Nortel Networks, see the
Cable Guide
.
2.
Connect the cable to an expansion module serial interface
(Figure 1-11)
or an adapter module serial interface
(Figure 1-12)
.
Note:
The
Cable Guide
refers to serial cables that transmit synchronous data
as “synchronous” cables.
ARN0069A
COM3
COM4
COM5
COM
U
D
DD
B1
B2
RLSD
Run
Boot
Fail
Pwr
RPS
Fan
Base
Adapter1
Adapter2
Expansion
DCM
PCMCIA
Advanced Remote Node
RLSD3
RLSD4
RLSD5
1
2
Serial
Serial
ISDN BRI
withNT1
STP
RCVR
NSRT
WFLT
Token Ring 1
STP
RCVR
NSRT
WFLT
Token Ring 2
UTP
To
Token Ring
network
Token Ring UTP cables
Expansion module UTP interface
