309985-C Rev 00
E-1
Appendix E
Default Settings
Table E-1
lists the factory default settings for the BayStack 410-24T switch.
Table E-1.
Factory Default Settings for the BayStack 410-24T Switch
Appears in this CI screen
Field
Default setting
IP Configuration/Setup (
page 3-8
)
BootP Request Mode
BootP Disabled
In-Band Stack IP Address
0.0.0.0
(no IP address assigned)
In-Band Switch IP Address
0.0.0.0
(no IP address assigned)
In-Band Subnet Mask
0.0.0.0
(no subnet mask assigned)
Default Gateway
0.0.0.0
(no IP address assigned)
IP Address to Ping
0.0.0.0
(no IP address assigned)
Start Ping
No
SNMP Configuration (
page 3-13
)
Read-Only Community String
public
Read-Write Community String
private
Trap IP Address
0.0.0.0
(no IP address assigned)
Community String
Zero-length string
Authentication Trap
Enabled
Link Up/Down Trap
Enabled
(continued)
