Using the Console Interface
309985-C Rev 00
3-13
SNMP Configuration
The SNMP Configuration screen (
Figure 3-4
) allows you to set or modify the
SNMP configuration parameters.
Choose SNMP Configuration (or press m) from the main menu to open the SNMP
Configuration screen.
Figure 3-4.
SNMP Configuration Screen
Table 3-3
describes the SNMP Configuration screen fields.
Table 3-3.
SNMP Configuration Screen Fields
Field
Description
Read-Only
Community String
The community string used for in-band read-only SNMP operations.
Default
public
Range
Any ASCII string of up to 32 printable characters
(continued)
SNMP Configuration
Read-Only Community String: [ public ]
Read-Write Community String: [ private ]
Trap #1 IP Address: [ 0.0.0.0 ]
Community String: [ ]
Trap #2 IP Address: [ 0.0.0.0 ]
Community String: [ ]
Trap #3 IP Address: [ 0.0.0.0 ]
Community String: [ ]
Trap #4 IP Address: [ 0.0.0.0 ]
Community String: [ ]
Authentication Trap: [ Enabled ]
AutoTopology: [ Enabled ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
