DC Inverter U-match Series Cassette Type Unit
5
Table 3.2
Outdoor Unit Accessories
No.
Name
Appearance
Q'ty
Usage
1
Drain Plug
1 or 3
To plug the unused drain hole
2
Drainage Connecter
or
1
To connect with the hard PVC
drain pipe
3.2 Selection of the Installation Location
ķ
. Check the support structure to verify that it has sufficient load-carrying capacity to support the
weight of the unit, and it can be securely mounted.
ĸ
. Do not install where there is a danger of combustible gas leakage.
Ĺ
. Do not install the unit near heat source, steam, or flammable gas.
ĺ
. Children should be kept away from unit.
Decide the installation location with the customer as follows:
3.2.1 Indoor Unit
Select an installation site where the following conditions are fulfilled and that
meets your customer's approval.
(1). No obstruction should block the air inlet or outlet vents.
(2). Make sure that the installation meets the requirement of the schematic
diagram of installation spaces.
(3). Check the support structure to verify that it has sufficient load carrying
capacity to support 4 times the weight of the indoor unit. Mount the unit
securely to reduce vibration noise.
(4). Unit should be mounted level.
(5). Select a location with easy access to outdoor unit and convenient
condensate drain connection.
(6). Be sure to leave sufficient space around the unit for service and
maintenance. Unit should be mounted a minimum of 1.8M (6 feet) above
the floor.
(7). When installing the suspension bolt, check if the structure can withstand 4
times of the weight of the unit. If not, reinforce it before installation.
Summary of Contents for GKU18USV4DH
