DC Inverter U-match Series Floor Ceiling Type Unit
8
ķ
.
Verify that the installation location has sufficient load-carrying capacity to support five (5) times
the weight of the indoor unit. Mount on surface that will not amplify sound or vibration.
ĸ
. If the unit is not mounted secuely, the indoor unit may fall and cause injuries.
Ĺ
. If the job is done with the panel frame only, there is a risk that the unit will come loose.
Fig. 4.1
Table 4.1 Unit: mm (inch)
Model
A
B
C
D
H
GFU18(5.3)USV4DH
GFU24(7.0)USV4DH
1220(48)
225(8-7/8)
1160(45-5/8)
280(11)
700(27-1/2)
GFU30(8.8)USV4DH
GFU36(10.6)USV4DH
GFU42(12.3)USV4DH
1420(55-7/8)
245(9-5/8)
1355(53-1/4)
280(11)
700(27-1/2)
GFU48(14.1)USV4DH
1700(66-7/8)
245(9-5/8)
1635(64-3/8)
280(11)
700(27-1/2)
4.1.2 Preparation for Installing the Indoor Unit
(1). Open the air inlet grille and the screw cover, and remove the screws.
(2). Release the claws in the 3 places indicated.
(3). Release the center hook and remove the front panel.
(4). Release the claws in the 2 or 3 places indicated and remove the electric
component cover.
