Nortec MH Series Installation Manual Download Page 6 | Manualshive

Page: 6 / 60

Nortec MH Series Installation Manual Download Page 6

10-00

Page 2
2008-12-03

1. INTRODUCTION

1.1 GENERAL

Thank you for purchasing the

Nortec MH Adiabatic Air Humidifier

.

The Nortec MH Adiabatic Air Humidifier incorporates the latest technical advances and
is designed to meet all recognized safety standards. Nevertheless, improper use of the
Nortec MH Adiabatic Air Humidifier may result in danger to the user or third parties
and/or damage of material assets.

To ensure safe, proper, and economical operation of the Nortec MH Adiabatic Air
Humidifier, please observe and comply with all information and safety information
contained in this installation and operating manual as well as in any separate
documentation related to the components installed in the humidification system.

If you have questions, which are not or insufficiently answered in this documentation,
please contact your Nortec representative. They will be glad to assist you.

1.2 NOTES ON THE INSTALLATION & OPERATING INSTRUCTIONS

Limitation

The product covered in this installation and operating instruction manual is solely the
Nortec MH Adiabatic Air Humidifier. The various accessories associated with the
Nortec MH Adiabatic Air Humidifier are only described in such detail that is necessary
for proper operation of the humidifier. Further information on accessories can be
obtained in the respective instructions.

These installation and operating instructions are restricted to the installation,
commissioning, operation, servicing, and troubleshooting of the Nortec MH Adiabatic
Air Humidifier and are meant for qualified personnel that are sufficiently qualified for
their respective work.

The installation and operating instructions are supplemented by various separate items
of documentation (manuals for accessories, etc.). Appropriate cross-references
are made to these publications in the installation and operating instructions.

«
...
4
5
6
7
8
...
»

Summary of Contents for MH Series





























































Reviews:

No comments