background image

Economy

NORTEC GS Series Gas Steam humidifiers 
provide clean steam humidification at an 
economical operating cost. Units are packaged 
in a powder coated cabinet for zero clearance 
space requirement while offering high efficiency 
output. They can be controlled from either a local 
humidistat, from the central building management 
system or multiple units can be staged together.

The combustion system utilizes a modulating 
forced draft combustion air blower, a negative 
pressure regulator gas valve and a 100% premix 
burner. On a call for humidity, the combustion  
air blower starts creating a negative pressure 
across the valve orifice located at the air inlet. 
The hot surface ignitor then energizes. The gas 
valve opens and the regulated gas/air mixture is 
forced through the burner ports and is ignited.

Easy Maintenance

The compact stainless steel heat exchanger has 
large flat surfaces to minimize scale buildup 
in the humidifier tank. Scale tends to fall off 
the exchanger wall to the bottom of the tank, 
maintaining efficient heat transfer to the water and 
extending the intervals between cleanings. The 
smooth stainless steel surface of the tank and 
removeable heat exchanger are easily cleaned and 
maintained.

The GS SERIES compact heat exchanger design 
provides a minimum footprint area where space 
requirement is an issue.

operating advantages

Compact removeable heat exchanger.  
105 lbs/hr of clean steam.

$/year

Operating costs based an electric cost of $0.08 per kWh, natural gas cost 

$0.75 per therm, full output for 2,000 hours per season. Efficiency of 

electric unit is 97% and efficiency of gas unit is 82%. Costs do not include 

electric peak demand charges.

Annual 

savings 

with gas

$

3,658

0

1000

2000

3000

4000

5000

6000

Electric

$

5,443

Gas

$

1,784

Annual Operating Cost of 

Natural Gas Humidifier vs Electric Humidifier

100 lbs/hr (45 kg/hr)

Summary of Contents for GS 100









Reviews: