Norsup 7026965, Installation Instructions Manual

Page: 16 / 273

4. OPERATION AND USE
4. OPERATION AND USE
4.1 Color screen wire controller interface introduction
(1) Main interface
(2) Button Description
NO. Name The button function
1
ON/OFF Press to start /shut off the unit
2
Parameter Click this button to view the unit state and the parameter
3
CLOCK
Press to set the clock, the timer on or timer off. When the
timer was starting, the button is green
4
Fault display Click to view fault history
5
Silent setting
Click to turn on/off silent function and to set timing Low
speed function.
6
MODE
Click to enter mode setting and the target temp. Setting
interface
7
Temp. curve Click to view the temp. and power curve
8
Water Inlet Temp.
Click to enter mode setting and the target temp. Setting
interface
⑨
LOCK
Click to lock the screen. Input “22” to unlock the screen by
press the “lock button”
4.2 Color screen wire controller function introduction
(1) Booting and shutdown
As shown in figure 1.1:
In shutdown status, click
①
then the unit will be booted