background image

Norsjö Carrier 4-Stroke

Model Post Petrol Short and Long version

SAFETY INSTRUCTIONS

Risk of carbon monoxide poisoning

Exhaust fumes from internal combustion engines contain carbon monoxide.

Breathing in the exhaust fumes can be lethal!

You should therefore consider the following:

• Never start the moped in a closed area which lacks good ventilation.

• Never breathe in the exhaust fumes.

• Always ensure that the exhaust pipe is free of obstruction.

Handling and fi lling up with fuel - fi re risk

• Never fi ll the moped up with fuel when the engine is running.

• Never overfi ll the tank.

• If a spillage does arise when fi lling up with petrol, wipe away the petrol carefully

   and then wait 5-10 minutes until any petrol that remains has evaporated.

• Do not fi ll up in the proximity of fi re.

• Never use a petrol-driven moped in an environment that is explosive or fl ammable.

• If there is a leakage in the fuel line, tank or any other part of the fuel system,

   the engine should be stopped immediately and the fault should be rectifi ed

   immediately.

• Avoid breathing in petrol fumes.

• Avoid skin contact with petrol.

Work with the moped’s battery

When working on the moped’s battery, special safety precautions must be taken. 

See further, page 24, “The starter battery”.

Page 

3 of 30

Summary of Contents for Carrier

































Reviews: