NORSELIGHT XENON R50 Series, User Manual

Page: 21 / 52

21
•
The searchlight must be mounted on a horizontal surface using 4 stainless screws.
•
The Main/Slave Operation Panel and the Switch is designed for installation in indoor applications.
•
The Access Point is designed for out side installation.
•
The Rectifier is designed for inside installation.
•
The Main Operation Panel requires 24V DC connected in series with a 1A fuse to the positive (+) conductor.
•
The Switch requires 24V DC. In addition to grounding
•
Depending on The Searchlight model it requires 115V AC or 230V AC.
•
Power supplied to the power supply unit must be 2 or 3-phase.
•
Current supplied to the lamp unit must be specific (se technical data for specific Type).
Note:
Disconnect the power when working on the equipment!
Electrical equipment must be installed by authorised personnel!
Check the polarity when connection of 24VDC!
All Searchlight system equipment MUST BE connected to ground/earth!
Current supplied to the lamp unit must be 65A DC for 1600W, 70A DC for 2000W and 100A for 3000W.
To be able to turn off the searchlight from the main panel, the switch on top of the Power Supply
N3-80 or N3-150 must be in position “0” (Zero). See picture 1
Picture 1:
3 Installation
3.1 Mechanical installation
3.2 Electric installation