P/N 050197 Rev. A
© 2015 Norsat International Inc.
Page 41 of 57
8 Quick Start Guide
Please follow the procedure below to finish a typical satellite acquisition.
8.1 Cable Connection
1)
Connect cables according to the table below:
Signal
Antenna port
ACU Port
Cable
DC Output
Power
DC Output (ACU)
Power cable
M&C
M&C
M&C (ACU)
Signal cable
Tx signal
TX
Tx port (Modem)
N-N coax cable
Rx signal
RX
Rx port (ACU &
Modem)
N-N coax cable
2)
Connect MODEM port on ACU to modem for GPS information:
Signal
Antenna port
Modem Port
Cable
GPS data
MODEM
Console
RJ45 serial cable
3)
Connect ACU to North American Type-B power source with 100-240VAC.
4)
Turn on ACU.
Wait for approximately 1 minute for GPS to lock.
8.2 Auto-acquire through Indoor ACU
1) Check there is no alarm. The alarm indicator is on ACU front panel.
To check the alarm code, please go to INFO – Alarm from ACU
