P/N 050197 Rev. A
© 2015 Norsat International Inc.
Page 39 of 57
7.7 Setting Page
Antenna parameters can be modified in the setting page:
To access the setting page, password ‘88292877’ is required.
To edit a parameter, press ‘set’ next to the parameter. Press ‘set’ again when finished and confirm the
change in the pop-up window.
•
Detection: Detection method during acquisition. Ensure the satellite profile has been setup with
Beacon or DVB mode.
•
Azimuth Scanning Window: Scanning window for Azimuth angle. User may set the scanning
window when the compass heading angle has larger offset.
•
Ant Cal: Antenna offset from readings to the actual values. To compensate for magnetic
declination, set the magnetic declination angle of the current location to Azimuth.
For information on Magnetic declination settings, see Magnetic declination model from Appendix
A
•
SoftwareLimit: Turn software limit on/off
•
LNB LO/AMP: local oscillator frequency of LNB and amplification of signal (AGC value) during
pointing.
•
GPS State: Auto is to retrieve Lat/Lon reading from GPS. Lat/Lon information can be manually
entered and press set to confirm.
