OPERATION AND MAINTENANCE MANUAL SL III ORIGINAL INSTRUCTION
Norlok Technology Inc.
519-759-5896
fax 519-759-2948
Page
|
4
Document No: 110011
Rev. No: 5.0
OPERATOR SAFETY NOTICE
The Surelok III is designed as a safe and reliable machine.
However, as with any punching machine, the critical danger area is the pinch point between the punch and die.
•
Keep fingers and limbs away from this critical pinch point.
•
Never operate this machine without all covers and guards in place.
•
Use 6mm Nylon disc to test safety feature, refer to Initial Testing section on page 7 of this manual
THE NATIONAL SAFETY COUNCIL REMINDS US THAT MANY ACCIDENTS ARE CAUSED BY
FAILURE TO FOLLOW FUNDAMENTAL SAFETY RULES.
This is the reason that a careful operator is the best guarantee of an accident free work
place.
a.
Disconnect and drain air before making any adjustments or servicing any Surelok components.
b.
Always be alert whenever operating any machinery.
c.
Only one person should control the machine(s). Never allow anyone to operate the controls
while you are working on this equipment. In addition to disconnecting power, always use
lockouts and warning signs to indicate that you are working on the machine(s).
d.
Keep your hands and arms away from internal workings of the machinery when starting, running
or stopping.
e.
Never override or disable any safety switch or safety interlock.
f.
Use extreme caution if maintenance or adjustments must be performed with power on and the
machine in operation.
g.
Always wear eye protection when operating or maintaining machinery.