OPERATION AND MAINTENANCE MANUAL SL III ORIGINAL INSTRUCTION
Norlok Technology Inc.
519-759-5896
fax 519-759-2948
Page
|
2
Document No: 110011
Rev. No: 5.0
SECTION 1.0 - SAFETY GUIDELINES
Before operating the machine, study and follow all safety guidelines in this manual, these precautions are intended
to prevent injury to you and your fellow workers. Please use EXTREME CAUTION before performing any procedure
or operation.
WARNING
This equipment is designed to be operated with all covers secured in place. Operation without these safeguards
may result in conditions that are hazardous to the operator and observers.
Follow Lockout Procedure to disconnect air and drain all air from the system when:
Doing any kind of maintenance to the machine
•
During any set-up changes
•
Moving the machine
•
When leaving machine unattended
SAFETY PRECAUTIONS BEFORE OPERATING THE MACHINE
Protect yourself. Keep your work area clear of all scrap, oil spills, rags, tools, and other obstructions, which could
cause you to slip, trip or fall.
Always use safety glasses that conform to ANSI Z87.1
and CAN/CSA Z94.3
Always wear proper personal hearing protection that
conforms to ANSI S12.6 (S3.19)
•
Look for the knob with lockout point sticker which shown
in image below push and turn it counterclockwise to match
hole on the valve body which will turn off the main air
supply.
•
Follow standard lock-out tag-out procedure before
removing any guards to avoid injury.
Make sure pneumatic pressures are at specified level
before operating this equipment.
Table 1