(Ex.: 10:15 am)
* The screen display shown below is for illustration purposes only.
The actual display will vary depending on how the water heater is being used.
* After a button is pressed, the display will gradually become darker to prevent unnecessary power consumption
by the remote controller.
(Ex.: 110°F)
The flame symbol is displayed during
combustion when using hot water or
recirculation functions.
A number will flash if a
failure occurs. (page 36.)
<Home Screen Example>
Screen Display
What is the home screen?
The home screen is displayed when the
button is "ON".
Normally, the hot water temperature and the clock, etc. are displayed.
Flame Symbol
During normal operation, the set
temperature is displayed.
Display for Recirculation Operation
Display for High Temperature
Temperature Setting
Clock Display
Error Code
* For systems that use recirculation operation, the symbol
is displayed when the Power ON/OFF button is set to "ON".
* It is displayed during the recirculation operation.
Display for Temperature Setting
The lock symbol is displayed
when the remote controller is
locked. (page 20.)
Locked Display
The clock symbol is displayed
when the recirculation timer is
activated. (page 14 - 15.)
Recirculation Timer
Displays when the set temperature
is 125°F/55°C (131°F) or higher.
Note: As shipped from the factory, the remote controller is set to display in °F and gallons.
To adjust the display to °C and liters, refer to the
page 13
.
─9─