The remote controller will emit a tone when a button is pressed.
Remote Controller (Required Accessory : RC-9018M)
*Using NC380 models, refer to RC-7649M section (page 21).
Activates the automatic water heater power
“ON” or “OFF” setting as determined by the
user selected schedule.
For turning the water heater
on/off.
(Next page)
Locks remote controller
operation. (page 20.)
Check the status of the
system or the number of
installed units.
(page 16, 36.)
Returns to the previous
screen while making system
settings or checking status.
Confirms changes
made by the user.
For setting the hot water
temperature, and
other settings.
* Use to change system
settings or to return to
the home screen.
* If you press the menu button
and press the temperature
setting buttons,
is sometimes displayed.
However, do not use this
mode as it is meant
for installation or service
personnel only.
Stops the tone that is emitted
when an error occurs.
(page 36.)
Cover shown in
the open position.
Prog Button / Indicator (Red)
Power ON / OFF Button
/ Indicator (Green)
Menu Button
Back Button
Alarm Off Button
/ Indicator (Red)
Speaker
Display Screen
Status Button
Lock Button
Enter Button
Hot Water Temperature
Setting Buttons
The part number is
printed on the surface
of the cover.
6. Remote Controller
*
This Remote Controller is not resistant to water, steam, chemicals, or UV rays. Install it in a location where it will not
be exposed to these conditions. If it must be installed outdoors, use a weatherproof enclosure. Refer the RC-9018M
Installation Manual for details.
Remote Controller
Part Number
─8─