4
• The time changes in 1 minute increments
with each press of the button, and then in 10
minutes increments if the button is pressed
and held.
•
[NRCR model only]
Temporary time is displayed.
• If the display is left untouched for
approximately 20 seconds without pressing
the
ENTER
button, the setting will be
completed. When the
Power
button is turned
ON, the home screen will be restored.
3. Use the / buttons to reset the clock.
4. Press the the
ENTER
button to complete the
clock setting.
2. Press the
ENTER
button.
1. Press the
MENU
button inside the cover.
(e.g. 10:15 am)
The screen returns to the previous screen.
Clock Adjustment
Clock Adjustment
• This adjustment can be made whether the
Power
button is ON/OFF.
NOTE
• In the event of a power outage
or after disconnecting power to
the Water Heater, when power is
restored, the clock on the display
screen will show “ - : - -
”
and the
clock will need to be reset.
•
[NRCR model only]
In the event of a power outage
or disconnecting power to the
Water Heater, and when power is
restored, the clock setting on the
display may now read an incorrect
time and will need to be reset to
the correct time.
• By default, when the
Power
button
is turned OFF, the clock display
disappears, but it is possible to
display the clock when the
Power
button is turned OFF by changing a
setting. (See page 10)
Operation
SHB8126(1)取説RC-9018M.indd 4
2019/08/30 16:41:50
