background image

SBB80J7-1

Rev. 05/16

 

Models : NC199OD (GQ-2857WZ US)

 

 

NC199DVC (GQ-2857WZ-FFA US)

TANKLESS GAS WATER HEATER

Owner’s Guide

NORITZ America Corporation

- Do not store or use gasoline or other flammable vapors and liquids in the 

vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the 

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service 

agency or the gas supplier.

If the information in this manual is not followed exactly, a fire or explosion 

may result causing property damage, personal injury, or death.

WARNING

FOR USE IN RESIDENTIAL OR MANUFACTURED HOME APPLICATIONS.

CERTIFIED

R

*SBB80J7*

Low NOx Approved

by SCAQMD

14 ng/J or 20 ppm

(Natural Gas Only)

Thank you for purchasing this Noritz Tankless Gas Water Heater. 

Before using, please:

Read this manual completely for operation instructions.

Completely fill out the warranty registration card (included separately) 

and mail the detachable portion to Noritz America Corporation.

Keep this manual (and the remainder of the warranty registration card) 

where it can be found whenever necessary.

Installation must conform with local codes, or in the absence of local 

codes, the National Fuel Gas Code, ANSI Z223.1/NFPA 54  - latest edition 

and/or the Natural Gas and Propane Installation Code CSA B149.1 - 

latest edition.

When applicable, installation must conform with the Manufactured 

Home Construction and Safety Standard, Title 24 CFR, Part 3280 or the 

Canadian Standard CAN/CSA-Z240 MH Mobile Homes, Series M86.

Noritz America reserves the right to discontinue, or change at any 

time, the designs and/or specifications of its products without notice.

Summary of Contents for NC199-DVC


















































Reviews: